|
|
Post by Akhil Kumar on Apr 30, 2013 8:21:30 GMT
What will be the impact of RESET command generated by host on the BLE controller?
|
|
|
|
Post by gunjan on Apr 30, 2013 8:48:01 GMT
it is design dependant, the architect decides which blocks will be reset when this RESET command comes.
|
|
|
|
Post by Akhil Kumar on Apr 30, 2013 9:04:52 GMT
it is design dependant, the architect decides which blocks will be reset when this RESET command comes.
link layer, after which LE controller shall enter in standby mode. In
note, it says that it is not necessary for designer to use RESET command
as hardware reset.
One more question regarding RESET command
is, when will RESET command be generated? Will it be only generated at
the time of power up of BLE device? |
|
|
|
Post by Amit Kumar Bharti on Apr 30, 2013 12:02:29 GMT
The Reset command will reset the Bluetooth Host Controller, Link Manager,
and the radio module. The current operational state will be lost, and all queued
packets will be lost. After the reset is completed, the Bluetooth device will enter
standby mode.
Note: after the reset has completed, the Host Controller will automatically
revert to the default values for the parameters for which default values are
defined in this specification.
|
|
